Lubricants, Fluids, Sealers and Adhesives
NOTE:
Per the warranty and policy manual the Ford
Engineering-approved refrigerant (see table for service part number)
must be used for air c..
Other information:
Special Tool(s) /
General Equipment
Resistance Spotwelding Equipment
Scraper for Straight Edges
Hot Air Gun
8 mm Drill Bit
MIG/MAG Welding Equipment
Spot Weld Drill Bit
Locking Pliers
Materials
Name
Specification
Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 805DTM
-
Flexible Foam Repair3M™ 08463, LORD Fusor® 121
-
Remo..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH lamps shown, RH lamps similar.
Remove the front bumper cover.
Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
Disconnect the electrical connector, remove the screws and the flashing light emitting diode LED lamp...