Other information:
Programming
NOTE:
If a new APIM is being installed, install the new APIM before carrying out the following procedure.
If replacing the APIM do not connect the new APIM to a Wi-Fi network before completing scan tool APIM replacement programming as it may cause programming concerns...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH lamps shown, RH lamps similar.
Remove the front bumper cover.
Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
Disconnect the electrical connector, remove the screws and the flashing light emitting diode LED lamp...