Other information:
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
Valve guides tend to wear in an hourglass pattern.
The ball gauge can be inserted into the combustion chamber side of the
valve guide, if necessary.
Use a ball gauge to determine the inside diameter of
the valve guides in 2 directions at the top, middle and bottom of the
valve guide...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Position aside the hood latch release cable junction block cover.
Release the retaining tabs on the hood latch release cable junction block cover.
Position aside the hood latch release cable junction block cover...