Other information:
Removal
Remove the main control valve body.
Refer to: Main Control Valve Body (307-01B Automatic Transmission - 10-Speed Automatic Transmission – 10R80, Removal and Installation).
Remove the intermediate speed sensor B.
Slide the plastic lock to the unlocked position...
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Using a non-marring tool, release and position the headlamp switch out.
Use the General Equipment: Interior Trim Remover
Disconnect the electrical connector and remove the headlamp switch...