Ford Explorer: Glass, Frames and Mechanisms / General Procedures - Power Door Window Initialization

Ford Explorer 2020-2021 Service Manual / Body and Paint / Body and Paint / Glass, Frames and Mechanisms / General Procedures - Power Door Window Initialization

Initialization

  1.   WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1.   WARNING: Keep objects and body parts clear of the glass panel when carrying out the initialization procedure. During the initialization procedure, the glass panel closes with high force and cannot detect objects in its path. Failure to follow this instruction may result in serious personal injury.

    NOTE: Make sure that the window runs are correctly installed and free of foreign material.

    Start the engine.
  1. Press and hold the window control switch until the door window is fully open.
  1. Release the window control switch.
  1. Lift and hold the window control switch until the door window is fully closed.
  1. Release the window control switch.
  1. Lift and hold the window control switch again for at least one second.
  1. Press and hold the window control switch until the door window is fully open.
  1. Release the window control switch.
  1. Lift and hold the window control switch until the window is fully closed.
  1. Test for correct window operation by carrying out the one-touch down and one-touch up features.

    General Procedures - Lead Terminal Repair

    Materials Name Specification Motorcraft® Ultra-Clear Spray Glass CleanerZC-23 ESR-M14P5-A  Repair Bring the vehicle up to at least the specified room temperature or abo..

    Removal and Installation - Driver Door Window Control Switch

    Special Tool(s) / General Equipment Interior Trim Remover Removal Remove the driver door window control switch and bezel as an assembly...

    Other information:

    Ford Explorer 2020-2021 Service Manual: Removal and Installation - Intake Manifold


    Materials Name Specification Motorcraft® Silicone Brake Caliper Grease and Dielectric CompoundXG-3-A ESE-M1C171-A  Removal NOTICE: The turbocharger compressor vanes can be damaged by even the smallest particles. When removing any turbocharger or engine air intake system component, ensure that no debris enters the system...

    Ford Explorer 2020-2021 Service Manual: Removal and Installation - Windshield Washer Pump


    Materials Name Specification Motorcraft® Premium Windshield Wash Concentrate with BitterantZC-32-B2 WSS-M14P19-A  Removal Remove the windshield washer reservoir. Refer to: Windshield Washer Reservoir (501-16 Wipers and Washers, Removal and Installation)...

    Categories

    Driver and Passenger Airbags

    WARNING: Do not place your arms on the airbag cover or through the steering wheel. Failure to follow this instruction could result in personal injury.

    WARNING: Keep the areas in front of the airbags free from obstruction. Do not affix anything to or over the airbag covers. Objects could become projectiles during airbag deployment or in a sudden stop. Failure to follow this instruction could result in personal injury or death.

    WARNING: Airbags can kill or injure a child in a child restraint. Never place a rear-facing child restraint in front of an active airbag. If you must use a forward-facing child restraint in the front seat, move the seat upon which the child restraint is installed all the way back.

    read more

     
    Copyright © 2021 www.foexplorer.com