Ford Explorer: Glass, Frames and Mechanisms / Removal and Installation - Front Door Window Glass

Ford Explorer 2020-2022 Service Manual / Body and Paint / Body and Paint / Glass, Frames and Mechanisms / Removal and Installation - Front Door Window Glass

Removal

NOTE: LH (left-hand) side shown, RH (right-hand) side similar.

  1. Remove the front door window regulator and motor.
    Refer to: Front Door Window Regulator and Motor (501-11 Glass, Frames and Mechanisms, Removal and Installation).

  1. Lower the front door glass to the full down position.
    1. Remove the tape.
    1. Lower the front door glass to the full down position.

  1. Remove the front door upper trim.
    1. Remove the pin-type retainer.
    1. Remove the pin-type retainer and release the front door upper trim.
    1. Release the front door upper trim.
    1. Release the front door upper trim.
    1. Remove the front door upper trim.
  1. Remove the front door inner belt moulding.
  1. Remove the front door glass.

Installation

  1. To install, reverse the removal procedure.
  1. Carry out the power door window initialization.
    Refer to: Power Door Window Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

    Removal and Installation - Front Door Glass Top Run

    Removal NOTE: LH (left-hand) side shown, RH (right-hand) side similar. NOTE: Removal steps in this procedure may contain installation details. Remove the front door window glass...

    Removal and Installation - Front Door Window Regulator and Motor

    Special Tool(s) / General Equipment Punch Removal   WARNING: The following procedure prescribes critical repair steps required for correct restraint system operation during a cra..

    Other information:

    Ford Explorer 2020-2022 Service Manual: Removal and Installation - Inner Quarter Panel


    Special Tool(s) / General Equipment Resistance Spotwelding Equipment Scraper for Straight Edges Hot Air Gun 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 805DTM -  Flexible Foam Repair3M™ 08463, LORD Fusor® 121 -  Remo..

    Ford Explorer 2020-2022 Owners Manual: Creating a MyKey


    Use the touchscreen to create a MyKey: Insert the key you want to program into the ignition. If your vehicle has a push-button start, place the remote control into the backup slot. See Passive Anti-Theft System. Switch the ignition on. Access the main menu in the touchscreen and then scroll through the menus to change the settings of your MyKey...

    Categories

    Locking and Unlocking

    You can use the power door lock control or the remote control to lock and unlock your vehicle.

    Power Door Locks

    The power door lock control is on the driver and front passenger door panels.

    read more

     
    Copyright © 2022 www.foexplorer.com