Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH side shown, RH side similar.
Remove the upper belt moulding screw at front of the door.
Torque:
12 lb.in (1.3 Nm)
Lift the moulding at the front edge using a non-marring
trim tool and slide forward to disengage from the tab at the rear and
remove th..
Note: Stay in neutral mode is a temporary vehicle state that works with
the engine being in the running or OFF state. Once in this mode, sufficient battery
voltage must be maintained or your vehicle returns to park. If the feature is left
active for extended time when engine is OFF...