Other information:
Removal
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation.
Using a diagnostic scan tool, begin the PMI process for the WACM following the on-screen instructions...
Removal
Remove the transmission fluid pan, gasket and filter.
Refer to: Transmission Fluid Pan, Gasket and Filter (307-01C Automatic Transmission - 10-Speed Automatic Transmission – 10R80 MHT, Removal and Installation).
Slide the plastic lock to the unlock position...