Ford Explorer: Roof Opening Panel / Removal and Installation - Roof Opening Panel Fixed Glass

Ford Explorer 2020-2026 Service Manual / Body and Paint / Body and Paint / Roof Opening Panel / Removal and Installation - Roof Opening Panel Fixed Glass

Removal

NOTE: Removal steps in this procedure may contain installation details.

Remove the roof opening panel frame.
Refer to: Roof Opening Panel Frame (501-17 Roof Opening Panel, Removal and Installation).

Remove the roof opening panel fixed glass.
1. Remove the bolts.
  Torque: 35 lb.in (4 Nm)
1. Carefully lift the frame assembly to remove the roof opening panel fixed glass.

Installation

To install, reverse the removal procedure.

Removal and Installation - Roof Opening Panel Control Switch

Removal The roof opening panel switch is replaced as an assembly with the overhead console. Refer to: Overhead Console (501-12 Instrument Panel and Console, Removal and Installation)...

Removal and Installation - Roof Opening Panel Frame

Removal NOTE: Removal steps in this procedure may contain installation details. If replacing the roof opening panel frame, remove the air deflector...

Other information:

Ford Explorer 2020-2026 Service Manual: General Procedures - Cylinder Bore Taper

Check NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper...

Ford Explorer 2020-2026 Service Manual: General Procedures - Piston Ring End Gap

Special Tool(s) / General Equipment Feeler Gauge Check NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Use care when fitting piston rings to avoid possible damage to the piston ring or the cylinder bore...