Ford Explorer: Automatic Transmission / Transfer Case

Ford Explorer 2020-2026 Service Manual / Powertrain / Automatic Transmission / Transfer Case

Removal and Installation - Transfer Case Clutch Actuator

Materials Name Specification Motorcraft® MERCON® LV Automatic Transmission FluidXT-10-QLVC WSS-M2C938-AMERCON® LV,   Removal NOTE: Removal steps in this procedure may con..

Specifications

  Lubricants, Fluids, Sealers and Adhesives Item Specification Transfer case fluid   Material: Motorcraft® MERCON® LV Automatic Transmissi..

Other information:

Ford Explorer 2020-2026 Service Manual: Description and Operation - High Voltage System Health and Safety Precautions - Overview


  WARNING: Service of the high voltage system on this vehicle is restricted to qualified personnel. The required qualifications vary by region. Always observe local laws and legislative directives regarding electric vehicle service. Failure to follow this instruction may result in serious personal injury or death...

Ford Explorer 2020-2026 Service Manual: General Procedures - Factory Mode Deactivation


Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center...

Categories

Intelligent Access Key

Note: You may not be able to shift out of park (P) unless the intelligent access key is inside your vehicle.

read more

 
Copyright © 2026 www.foexplorer.com