Ford Explorer: Powertrain / Automatic Transmission
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the valve cover.
Refer to: Valve Cover (303-01A Engine - 2...
Other information:
Removal
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation.
Using a diagnostic scan tool, begin the PMI process for the WACM following the on-screen instructions...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the bolt and position the coolant hose aside.
Torque:
97 lb.in (11 Nm)
Disconnect the electrical connector...
Categories
The front outboard and rear safety restraints in the vehicle are combination
lap and shoulder belts.

read more