Ford Explorer: Automatic Transmission / Transmission Cooling - 10-Speed Automatic Transmission – 10R60
Removal
Remove the main control valve body.
Refer to: Main Control Valve Body (307-01B Automatic Transmission - 10-Speed Automatic Transmission – 10R80, Removal and Installation)...
The
transmission fluid cooling system consists of a heat exchanger mounted
to the transmission. The heat exchanger has both transmission fluid and
engine coolant flowing through it in separate cham..
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the diagnostic scan tool
prior to removing the module. This information must be downloaded into
the new module after installation...
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Open the rear tail gate.
Release the clips and remove the upper liftgate trim panel...
https://magicaliptv.com/iptv-free-trials/
Categories
WARNING: Position the seatbelt height adjuster so that the seatbelt rests
across the middle of your shoulder. Failure to adjust the seatbelt correctly could
reduce its effectiveness and increase the risk of injury in a crash.

read more