Ford Explorer: Engine / Intake Air Distribution and Filtering - 2.3L EcoBoost (201kW/273PS)

Ford Explorer 2020-2022 Service Manual / Powertrain / Engine / Intake Air Distribution and Filtering - 2.3L EcoBoost (201kW/273PS)

Removal and Installation - Exhaust Gas Recirculation (EGR) Inlet Tube

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the EGR cooler. Refer to: Exhaust Gas Recirculation (EGR) Valve (303-08A Engine Emission Control..

Description and Operation - Intake Air Distribution and Filtering - Overview

Overview The air intake system cleans intake air with a replaceable, dry-type engine Air Cleaner (ACL) element made of treated, pleated paper. A new Air Cleaner (ACL) element must be installed per..

Other information:

Ford Explorer 2020-2022 Service Manual: General Procedures - Cruise Control Radar Alignment


Activation Vertical Alignment NOTE: In order to align the CCM, the front bumper cover must be removed to access the sensor and the vehicle must be in a wheel alignment bay station so that the vehicle is level. NOTE: Damage to the CCM bracket may affect correct alignment...

Ford Explorer 2020-2022 Service Manual: Description and Operation - Front Seats - System Operation and Component Description


System Operation System Diagram - Memory Seat Item Description 1 HS-CAN1 2 PCM 3 BCM 4 HS-CAN1 5 Ignition Switch 6 GWM 7 Memory Set Switch 8 Driver Seat Control Switch 9 MS-CAN 10 DSM 11 MS-CAN 12 DDM 13 Memory Power Seat Motors Network Message Chart..

Categories

Fastening the Seatbelts

The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts.

read more

 
Copyright © 2022 www.foexplorer.com