Ford Explorer: Engine / Fuel Charging and Controls - 2.3L EcoBoost (201kW/273PS)

Removal and Installation - Transmission Fluid Heater Coolant Control Valve

Removal   WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth. Loosen the pressure relief cap...

Description and Operation - Fuel Charging and Controls - Component Location

2..

Other information:

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Rear Door Upper Moulding

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: LH side shown, RH side similar. Remove the upper belt moulding screw at front of the door. Torque: 12 lb.in (1.3 Nm) Lift the moulding at the front edge using a non-marring trim tool and slide forward to disengage from the tab at the rear and remove th..

Ford Explorer 2020-2026 Service Manual: Removal and Installation - A-Pillar Outer Panel Section and Reinforcement

Special Tool(s) / General Equipment Resistance Spotwelding Equipment Hot Air Gun 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 805DTM -  Flexible Foam Repair3M™ 08463, LORD Fusor® 121 -  Removal   WARNING: Electri..