Kia Picanto: ISG (Idle Stop and Go) system : (if equipped) / ISG system malfunction

Kia Picanto 2024-2026 Owner's Manual / Driving your vehicle / ISG (Idle Stop and Go) system : (if equipped) / ISG system malfunction

The system may not operate when:

  • A fault occurs in an ISG-related sensor or elsewhere in the Idle Stop and Go system, preventing normal automatic stop and restart operation.

If a malfunction is detected, the yellow AUTO STOP indicator (Yellow AUTO STOP indicator signalling an ISG system malfunction) in the instrument cluster flashes for 5 seconds and then remains illuminated. The light on the ISG OFF button also comes on, indicating that the system requires attention.

NOTE

  • If pressing the ISG OFF button again does not extinguish its light, or if ISG repeatedly fails to operate correctly, have your Kia Picanto inspected by a professional workshop as soon as possible.

    Kia recommends contacting an authorised Kia dealer or service partner to investigate the cause.

  • An illuminated ISG OFF button light may go out after driving at approximately 80 km/h for up to two hours with the fan speed control knob set below the second position. Only maintain this speed where road conditions and posted limits permit. If the light remains on despite this procedure, arrange an inspection by a professional workshop as soon as possible. Kia recommends contacting an authorised Kia dealer or service partner.

NOTE

For ISG operation to be available, the battery sensor needs approximately 4 hours to calibrate with the ignition switched off. After this period, start and stop the engine 2 or 3 times to complete the procedure before using the Kia Picanto Idle Stop and Go function.

WARNING

An engine stopped by Idle Stop can restart automatically without any action from the driver. A silent engine in this mode must not be treated as an engine that has been fully switched off.

Before leaving your Kia Picanto or carrying out any work in the engine compartment, switch the engine off completely. Turn the ignition switch or ENGINE START/STOP button to LOCK (OFF), or remove the ignition key, as applicable to your vehicle. Do not rely on Idle Stop to keep the engine stopped while you are away from the driving position or working under the bonnet.

    Condition of ISG system operation. ISG system deactivation

    Condition of ISG system operation The ISG system operates only when the following requirements are satisfied: The driver’s seat belt is securely fastened...

    Economical operation

    Fuel economy in your Kia Picanto depends largely on how you drive, the roads you use and the conditions in which you travel. Smooth driving, suitable speeds and regular maintenance all contribute..

    Other information:

    Ford Explorer 2020-2026 Owners Manual: Warning Lamps and Indicators


    The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information...

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - Steering Column Control Switch


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the steering column shrouds. Refer to: Steering Column Shrouds (501-05 Interior Trim and Ornamentation, Removal and Installation). Remove the steering column control switch...

    Categories

    Fastening the Seatbelts

    The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts.

    read more

     
    Copyright © 2026 www.foexplorer.com