Ford Explorer: Instrumentation and Warning Systems / Pedestrian Alert System

Ford Explorer 2020-2026 Service Manual / Electrical / Instrumentation and Warning Systems / Pedestrian Alert System

Removal and Installation - Rear Parking Aid Sensor

Removal Remove the rear bumper cover. Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation). If equipped. Position aside the connector shields...

Description and Operation - Pedestrian Alert System - Component Location

..

Other information:

Ford Explorer 2020-2026 Owners Manual: Bulb Specification Chart


Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized D.O.T. marking for North America to make sure they have the proper lamp performance, light brightness, light pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb illumination time...

Ford Explorer 2020-2026 Service Manual: General Procedures - Transport Mode Deactivation


Deactivation NOTE: After vehicle build, some vehicle modules are set in Transport mode including the IPC and the BCM. Transport mode reduces battery drain during longer periods where the vehicle is not used. While in transport mode, the IPC displays TRANSPORT MODE CONTACT DEALER in the message center...

Categories

Locking and Unlocking

You can use the power door lock control or the remote control to lock and unlock your vehicle.

Power Door Locks

The power door lock control is on the driver and front passenger door panels.

read more

 
Copyright © 2026 www.foexplorer.com