Ford Explorer: Electrical / Instrumentation and Warning Systems

Ford Explorer 2020-2025 Service Manual / Electrical / Instrumentation and Warning Systems

Diagnosis and Testing - Instrumentation, Message Center and Warning Chimes

Diagnostic Trouble Code (DTC) Chart Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Informati..

Instrumentation, Message Center and Warning Chimes

..

Other information:

Ford Explorer 2020-2025 Service Manual: Description and Operation - Cruise Control - Overview


Overview The cruise control system is controlled by the PCM. The cruise control mode is selected from the steering wheel mounted switches (ON/OFF, SET+, SET- and CAN/RES), which are integrated into the LH steering wheel switch. The cruise control system maintains a selected vehicle speed between 32 km/h (20 mph), or 30 km/h (18 mph) (metric cluster), and the maximum limited vehicle speed...

Ford Explorer 2020-2025 Service Manual: General Procedures - Exhaust Manifold Cleaning and Inspection


Special Tool(s) / General Equipment Feeler Gauge Cleaning Clean the exhaust manifold using a suitable solvent. Use a plastic scraping tool to clean the gasket sealing surfaces. Inspection NOTE: New exhaust manifold gaskets, studs, nuts and/or bolts must be installed when an exhaust manifold is serviced...

Categories

Locking and Unlocking

You can use the power door lock control or the remote control to lock and unlock your vehicle.

Power Door Locks

The power door lock control is on the driver and front passenger door panels.

read more

 
Copyright © 2025 www.foexplorer.com