Ford Explorer: General Service Information / Identification Codes

General Procedures - Wire Terminal Inspection and Removal

Disconnect   WARNING: Before beginning any service procedure in this section, refer to Health and Safety Precautions in section 100-00 General Information...

Description and Operation - Identification Codes

Vehicle Identification Number (VIN) VIN Locator The VIN is a 17-digit combination of letters and numbers. The VIN is stamped on a metal tab riveted to the instrument panel, top upper left of..

Other information:

Ford Explorer 2020-2026 Service Manual: Description and Operation - High Voltage Battery, Mounting and Cables - System Operation and Component Description

System Diagram Item Description 1 Current Sensor 2 Contactor Sense Leads 3 BECM 4 Precharge Contactor Coil 5 Positive Contactor Coil 6 Negative Contactor Coil 7 High Voltage Battery Junction Box 8 Temperature Sensors 9 Cell Voltage Sense Leads 10 PCM 11 Battery Cell Arrays 12 GWM 13 RCM ..

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Cylinder Head Temperature 2 (CHT2) Sensor

Materials Name Specification Motorcraft® Silicone Brake Caliper Grease and Dielectric CompoundXG-3-A ESE-M1C171-A  Removal NOTICE: Do not pull the engine appearance cover forward or sideways to remove. Failure to press straight upward on the underside of the cover at the attachment points may result in damage to the cover or engine components...