Ford Explorer: Battery and Charging System / Accessory Charging

Removal and Installation - Direct Current/Direct Current (DC/DC) Converter Control Module

Removal   WARNING: Disconnect the 12 volt battery before servicing the direct current to alternating current (DC-AC) inverter or alternating current (AC) powerpoint to prevent the risk of ..

Description and Operation - Wireless Accessory Charging Module (WACM) - Overview

The WACM is a 5 watt wireless power transmitter designed to energize a secondary coil found in a secondary device such as a smartphone or in an added accessory such as a wireless charging phone sle..

Other information:

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Rear Door Upper Moulding

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: LH side shown, RH side similar. Remove the upper belt moulding screw at front of the door. Torque: 12 lb.in (1.3 Nm) Lift the moulding at the front edge using a non-marring trim tool and slide forward to disengage from the tab at the rear and remove th..

Ford Explorer 2020-2026 Service Manual: Description and Operation - Flasher Lighting, Siren and Speaker System - Overview

Overview Spotlamps The spotlamps provide an exterior illumination source that can be directed by an interior control handle to illuminate the desired object. Flashing Light Emitting Diodes (LEDs) The flashing Light Emitting Diodes (LEDs) are used to visually alert individuals to the vehicle's presence...