Ford Explorer: Keys and Remote Controls / Remote Control

Ford Explorer 2020-2026 Owners Manual / Keys and Remote Controls / Remote Control

General Information on Radio Frequencies

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harm..

Integrated Keyhead Transmitter (If Equipped)

Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The integrated keyhead transmitter functions as a programmed ignition key that operates all th..

Other information:

Ford Explorer 2020-2026 Service Manual: General Procedures - Factory Mode Deactivation


Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center...

Ford Explorer 2020-2026 Owners Manual: USING DRIVER ALERT


Switching the System On and Off Switch the system on or off using the touchscreen. See Settings. When active, the system monitors your alertness level based upon your driving behavior in relation to the lane markings, and other factors. System Warnings Note: The system does not issue warnings below approximately 40 mph (64 km/h)...

Categories

Seatbelt Height Adjustment

WARNING: Position the seatbelt height adjuster so that the seatbelt rests across the middle of your shoulder. Failure to adjust the seatbelt correctly could reduce its effectiveness and increase the risk of injury in a crash.

read more

 
Copyright © 2026 www.foexplorer.com