Ford Explorer: Capacities and Specifications / Motorcraft Parts - 3.3L

Ford Explorer 2020-2025 Owners Manual / Capacities and Specifications / Motorcraft Parts - 3.3L

1 If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36.

2 See your authorized dealer for correct replacement.

3 For spark plug replacement, contact your authorized dealer. Replace the spark plugs at the appropriate intervals. See Scheduled Maintenance.

We recommend Motorcraft replacement parts available at your authorized dealer or at fordparts.com for scheduled maintenance. These parts engineered for your vehicle meet or exceed our specifications. Use of other parts could impact vehicle performance, emissions and durability. Your warranty could be void for any damage related to use of other parts.

Motorcraft Parts - 3.0L

1 If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36. 2 See your authorized dealer for correct replacement...

Vehicle Identification Number & Vehicle Certification Label

Vehicle Identification Number The vehicle identification number is on the left-hand side of the instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identifi..

Other information:

Ford Explorer 2020-2025 Service Manual: Removal and Installation - Grille Mounted Flashing Light Emitting Diode (LED) Lamps

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: LH lamps shown, RH lamps similar. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation). Cut the tie strap, disconnect the electrical connector, remove the nuts and the flashing light emitting diode (LED) lamp...

Ford Explorer 2020-2025 Service Manual: Description and Operation - Flasher Lighting, Siren and Speaker System - System Operation and Component Description

System Operation Description and Operation Spotlamps The LH and RH spotlamps are mounted on the A-pillers and are equipped with Light Emitting Diodes (LEDs). The spotlamps are provided battery voltage from BCMC fuse 108 (20A) and are grounded to the vehicle body through the spotlamp mount...