Ford Explorer: Driveline / Rear Drive Axle/Differential

Disassembly and Assembly - Driveshaft Universal Joint

Special Tool(s) / General Equipment 205-086 (T74P-4635-C) Installer/Remover, C-Frame and Screw Materials Name Specification Motorcraft® Premium Long-Life GreaseXG-1-E1 ESA-M1C7..

Specifications

  Capacities Item RDU equipped with 8.1-Inch Ring Gear RDU equipped with 8.8-Inch Ring Gear   Material: Motorcraft® SAE 75W-85 Pre..

Other information:

Ford Explorer 2020-2025 Service Manual: Removal and Installation - AM/FM1 Antenna Amplifier

Special Tool(s) / General Equipment Interior Trim Remover Removal NOTE: Removal steps in this procedure may contain installation details. Release the clips and remove the liftgate center upper trim panel. Use the General Equipment: Interior Trim Remover Disconnect the connectors, remove the screw and the AM/FM1 antenna amplifier...

Ford Explorer 2020-2025 Service Manual: General Procedures - Balance Shaft Backlash

Special Tool(s) / General Equipment 100-002 (TOOL-4201-C) Holding Fixture with Dial Indicator Gauge 303-1688Preload Tool, Balance Shaft 303-507Timing Peg, Crankshaft TDCTKIT-2001N-FLMTKIT-2001N-ROW Check Install the special tool and rotate the crankshaft slowly clockwise until the crankshaft balance weight is up against the Crankshaft TDC Timing Peg...