Ford Explorer: MyKey™ / Checking MyKey System Status

Ford Explorer 2020-2025 Owners Manual / MyKey™ / Checking MyKey System Status

You can find information about your programmed MyKeys by using the touchscreen. See Settings.

MyKey Distance

Tracks the distance when drivers use a MyKey. The only way to delete the accumulated distance is by using an admin key to clear all MyKeys. If the distance does not accumulate as expected, then the intended user is not using the MyKey, or an admin key user recently cleared and then recreated a MyKey.

https://magicaliptv.com/iptv-free-trials/

Number of MyKeys

Indicates the number of MyKeys you have programmed to your vehicle. Use this feature to detect how many MyKeys you have for your vehicle and determine when you have deleted all MyKeys.

Number of Admin Keys

Indicates how many admin keys you have programmed to your vehicle. Use this feature to determine how many admin keys you have for your vehicle, and detect if an additional MyKey has been programmed.

Clearing All MyKeys

When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the touchscreen...

Using MyKey With Remote Start Systems & MyKey – Troubleshooting

Using MyKey With Remote Start Systems MyKey is not compatible with non Ford-approved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for ..

Other information:

Ford Explorer 2020-2025 Service Manual: Removal and Installation - Rear Air Distribution Door Actuator

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the RH loadspace trim panel. Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). Disconnect the electrical connector, remove the retainers and the rear air distribution door actuator...

Ford Explorer 2020-2025 Service Manual: Removal and Installation - Rear Door Upper Moulding

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: LH side shown, RH side similar. Remove the upper belt moulding screw at front of the door. Torque: 12 lb.in (1.3 Nm) Lift the moulding at the front edge using a non-marring trim tool and slide forward to disengage from the tab at the rear and remove th..