Ford Explorer: MyKey™ / Clearing All MyKeys

Ford Explorer 2020-2026 Owners Manual / MyKey™ / Clearing All MyKeys

When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the touchscreen.

Switch the ignition on using an admin key.
Access the main menu in the touchscreen and then scroll through the menus to begin clearing your MyKey programming. See Settings.
Follow the instructions in the display.
A confirmation message appears in the display after you finish clearing your MyKeys.

Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status. You cannot remove the MyKey restrictions individually.

Creating a MyKey

Use the touchscreen to create a MyKey: Insert the key you want to program into the ignition. If your vehicle has a push-button start, place the remote control into the backup slot...

Checking MyKey System Status

You can find information about your programmed MyKeys by using the touchscreen. See Settings. MyKey Distance Tracks the distance when drivers use a MyKey...

Other information:

Ford Explorer 2020-2026 Service Manual: Diagnosis and Testing - D Clutch

Symptom Chart D Clutch For D clutch operation, REFER to: D Clutch (307-01A Automatic Transmission - 10-Speed Automatic Transmission – 10R60, Description and Operation). D Clutch Condition Possible Sources Action D clutch does not apply SSD mechanically stuck OFF INSTALL a new solenoid...

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Passenger Door Module (PDM)

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: If installing a new module, it is necessary to upload the module configuration information to the diagnostic scan tool prior to removing the module. This information must be downloaded into the new module after installation...