Ford Explorer: MyKey™ / Creating a MyKey

Ford Explorer 2020-2022 Owners Manual / MyKey™ / Creating a MyKey

Use the touchscreen to create a MyKey:

  1. Insert the key you want to program into the ignition. If your vehicle has a push-button start, place the remote control into the backup slot. See Passive Anti-Theft System.
  2. Switch the ignition on.
  3. Access the main menu in the touchscreen and then scroll through the menus to change the settings of your MyKey. From the MyKey menu select the option Create MyKey. See Settings.
  4. When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or remote control.

You have successfully created a MyKey. Make sure you label it so you can distinguish it from the admin keys.

You can also program configurable settings for the key(s). See Programming and Changing Configurable Settings.

Programming and Changing Configurable Settings

Use the touchscreen to access your configurable MyKey settings.

  1. Switch the ignition on using an admin key or remote control you want to program.
  2. Access the main menu in the information display and then scroll through the menus to change the settings of your MyKey. See Settings.
  3. Follow the instructions in the touchscreen. The programmed restrictions apply when you switch the vehicle off, open and close the driver door and restart your vehicle with the programmed key or remote control.

Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the vehicle off, however, you will need an admin key to change or clear your MyKey settings. When you make any changes to your MyKey settings, you change the settings for every MyKey. You cannot make individual changes to apply to certain MyKeys.

    Optional Settings

    You can configure certain vehicle feature settings when you first create a MyKey. You can also change the settings afterward with an admin key. Note: Not every feature applies to every vehicle in e..

    Clearing All MyKeys

    When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the touchscreen...

    Other information:

    Ford Explorer 2020-2022 Service Manual: Removal and Installation - Toe Link


    Special Tool(s) / General Equipment Vehicle/Axle Stands Removal NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense...

    Ford Explorer 2020-2022 Service Manual: Removal and Installation - Air Conditioning (A/C) Pressure Transducer - 2.3L EcoBoost (201kW/273PS)


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe (303-12A Intake Air Distribution and Filtering - 2.3L EcoBoost (201kW/273PS), Removal and Installation)...

    Categories

    Children and Airbags

    WARNING: Airbags can kill or injure a child in a child restraint. Never place a rear-facing child restraint in front of an active airbag. If you must use a forward-facing child restraint in the front seat, move the seat upon which the child restraint is installed all the way back.

    read more

     
    Copyright © 2022 www.foexplorer.com