Ford Explorer: Supplemental Climate Control / Description and Operation - Supplemental Climate Control - Component Location
Item |
Description |
1 |
Cabin heater coolant pump |
2 |
Cabin heater coolant temperature sensor |
Item |
Description |
1 |
Rear evaporator shutoff valve |
2 |
Cabin heater coolant diverter valve |
3 |
High voltage battery coolant cooler |
Overview
The cabin coolant heater system provides warm coolant to the heater core to warm the passenger compartment whenever the front DATC module requests heat and the HEV is in a driving mode, remo..
Other information:
Adjustment
NOTE:
Refer to the appropriate section and procedure for special instructions on loosening and tightening mount fasteners.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
Loosen, but do not remove, the powertrain/drivetrain mount fasteners...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
During engine repair procedures, cleanliness is extremely
important. Any foreign material (including any material created while
cleaning gasket surfaces) that enters the oil passages, coolant passages
or the oil pan can cause engine failure...
https://magicaliptv.com/iptv-free-trials/
Categories
Push the lever up or down to operate
the windshield wipers.

A - Single wipe.
read more