Ford Explorer: Lane Keeping System / Description and Operation - Lane Keeping System - Overview

Ford Explorer 2020-2026 Service Manual / Electrical / Electronic Feature Group / Lane Keeping System / Description and Operation - Lane Keeping System - Overview

Overview

The Lane Keeping System (LKS) has 2 functions, lane keeping aid and lane keeping alert. The Lane Keeping System (LKS) utilizes the camera located in the IPMA to detect and track the road lane markings. The lane keeping alert detects unintentional drifting toward the outside of the lane and alerts the driver through steering wheel vibrations and a visual alert in the IPC message center. The lane keeping aid assists the driver by automatically providing steering torque to help the driver keep the vehicle in the lane.

Description and Operation - Lane Keeping System - Component Location

Component Location - Lane Keeping System Item Description 1 IPMA. 2 Lane keeping system (LKS) switch (integral to the LH steering column multifunction switch)...

Description and Operation - Lane Keeping System - System Operation and Component Description

System Operation Lane Keeping Alert and Lane Keeping Aid Item Description 1 Lane Keeping System Switch 2 IPMA 3 GWM 4 Camera Windshield Defr..

Other information:

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Front Door Side Impact Sensor

Removal WARNING: The following procedure prescribes critical repair steps required for correct restraint system operation during a crash. Follow all notes and steps carefully. Failure to follow step instructions may result in incorrect operation of the restraint system and increases the risk of serious personal injury or death in a crash...

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Body Control Module (BCM)

Removal NOTE: Removal steps in this procedure may contain installation details. If installing a new BCM, connect a battery charger to the battery to make sure it is charged to maintain proper battery voltage. Refer to: Battery Charging (414-01 Battery, Mounting and Cables, General Procedures)...