Kia Picanto: Winter driving / Use approved window washer anti-freeze in system. Don't let your parking brake freeze

Kia Picanto 2024-2026 Owner's Manual / Driving your vehicle / Winter driving / Use approved window washer anti-freeze in system. Don't let your parking brake freeze

Use approved window washer anti-freeze in system

Protect the windscreen washer system against freezing by adding an approved washer anti-freeze solution, following the mixing and usage instructions on its container. Suitable products are available from authorised Kia dealers or service partners and most automotive parts outlets. Use a product intended specifically for window washers; engine coolant and other types of anti-freeze can damage the vehicle’s paint finish.

Don't let your parking brake freeze

The parking brake can freeze in the applied position under certain winter conditions. This is particularly likely when snow or ice has collected around the rear brakes, or when the brakes are wet. If freezing is a concern, apply the parking brake temporarily while securing the vehicle. Use P (Park) for an automatic transmission, N (Neutral) where specified for an automated manual transmission, or first or reverse gear as appropriate for a manual or automated manual transmission. Follow the parking procedure applicable to your transmission. Securely chock the rear wheels before releasing the parking brake so that the vehicle cannot roll.

    Check spark plugs and ignition system. To keep locks from freezing

    Check spark plugs and ignition system Inspect the spark plugs following the instructions in section 8 and replace them when necessary. Check the ignition wiring and related components at the same..

    Don't let ice and snow accumulate underneath. Carry emergency equipment

    Don't let ice and snow accumulate underneath Snow and ice can collect beneath the wheel arches and interfere with steering movement. When driving your Kia Picanto in severe winter conditions..

    Other information:

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - Camshaft Position (CMP) Sensor


    Materials Name Specification Motorcraft® Silicone Brake Caliper Grease and Dielectric CompoundXG-3-A ESE-M1C171-A  Removal NOTE: Removal steps in this procedure may contain installation details. Exhaust Camshaft Position (CMP) Sensor NOTICE: Do not pull the engine appearance cover forward or sideways to remove...

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - Hood Latch


    Removal NOTE: Removal steps in this procedure may contain installation details. Position aside the hood latch release cable junction block cover. Release the retaining tabs on the hood latch release cable junction block cover. Position aside the hood latch release cable junction block cover...

    Categories

    Gauges

    4 Inch Display

    A - Tachometer.

    B - Information display.

    C - Speedometer.

    D - Fuel gauge.

    E - Engine coolant temperature gauge.

    read more

     
    Copyright © 2026 www.foexplorer.com