Ford Explorer: Capacities and Specifications / Transmission Code Designation

The transmission code is on the Safety Compliance Certification Label. The following
table shows the transmission code along with the transmission description.

Vehicle Identification Number
The vehicle identification number is on the left-hand side of the instrument
panel.
Please note that in the graphic, XXXX is representative of your vehicle identifi..
Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity
grade, it could result in:
Compone..
Other information:
Removal
NOTICE:
Suspension fasteners are critical parts that affect the
performance of vital components and systems. Failure of these fasteners
may result in major service expense. Use the same or equivalent parts if
replacement is necessary. Do not use a replacement part of lesser
quality or substitute design...
Activation
Update the AWD (all-wheel drive) module to the
latest calibration available. Module reprogramming will erase stored
transfer case clutch kiss point values and initiate rapid kiss point
learn procedure. If no later calibration is available then proceed with
process below:
1...
Categories
Push the lever up or down to operate
the windshield wipers.

A - Single wipe.
read more