Kia Picanto: Front End Body Panels / Removal and Installation - Cowl Panel Grille
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Remove the wiper pivot arms.
Refer to: Windshield Wiper Pivot Arm (501-16 Wipers and Washers, Removal and Installation).
-
-
Pull the grille upwards and remove the RH side cowl panel grille.
-
-
Remove the retainers and the LH side cowl panel grille.
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the wiper linkage assembly.
Refer to: Wiper Linkage Assembly (501-16 Wipers and Washers, Removal a..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02 Jacking and Li..
Other information:
Check
NOTE:
Refer to the appropriate Section 303-01 for the specifications.
NOTE:
The cylinder bore must be within the specifications for taper and out-of-round before fitting a piston.
Measure the cylinder bore in 2 directions...
Removal
Remove the main control valve body.
Refer to: Main Control Valve Body (307-01B Automatic Transmission - 10-Speed Automatic Transmission – 10R80, Removal and Installation).
Remove the TSS sensor.
Slide the plastic lock to the unlocked position...
Categories
You can use the power door lock control or the remote control to lock and unlock
your vehicle.
Power Door Locks
The power door lock control is on the driver and front passenger door panels.

read more