Ford Explorer: Automatic Transmission - 10-Speed Automatic Transmission – 10R60 / Description and Operation - Transmission Fluid Auxiliary Pump

Ford Explorer 2020-2026 Service Manual / Powertrain / Automatic Transmission / Automatic Transmission - 10-Speed Automatic Transmission – 10R60 / Description and Operation - Transmission Fluid Auxiliary Pump

Item Description
1 Transmission fluid auxiliary pump
2 Transmission fluid auxiliary pump tube
3 Transmission fluid auxiliary pump tube seal
4 Transmission fluid auxiliary pump tube O-ring
5 Transmission fluid auxiliary pump fluid inlet

10-speed transmissions with the auto-start stop feature are equipped with a transmission fluid auxiliary pump. This electronic pump is turned on before an engine stop event; allowing the transmission to remain engaged during the stop event. This allows quick response on the engine restart because the transmission is already in gear. The transmission fluid auxiliary pump does not have sufficient flow to apply clutches, but can keep clutches on when the engine stops and the main hydraulic pump stops providing pressure.

    Description and Operation - Planetary Assembly

    Planetary Gearset Exploded View Item Description 1 Ring gear No. 1 2 Sun gear No...

    Description and Operation - Torque Converter

    Overview Item Description 1 TCC solenoid 2 TCC regulator valve assembly 3 TCC apply circuit 4 ..

    Other information:

    Ford Explorer 2020-2026 Service Manual: General Procedures - Cylinder Bore Taper


    Check NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper...

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - High Voltage Low Current Fuse - Hybrid Electric Vehicle (HEV)


    Removal   WARNING: To prevent the risk of high-voltage shock, always follow precisely all warnings and service instructions, including instructions to depower the system. The high-voltage system utilizes approximately 450 volts DC, provided through high-voltage cables to its components and modules...

    Categories

    Locking and Unlocking

    You can use the power door lock control or the remote control to lock and unlock your vehicle.

    Power Door Locks

    The power door lock control is on the driver and front passenger door panels.

    read more

     
    Copyright © 2026 www.foexplorer.com