Ford Explorer: Automatic Transmission - 10-Speed Automatic Transmission – 10R60 / Description and Operation - Planetary Assembly

Ford Explorer 2020-2025 Service Manual / Powertrain / Automatic Transmission / Automatic Transmission - 10-Speed Automatic Transmission – 10R60 / Description and Operation - Planetary Assembly

Planetary Gearset Exploded View

Item	Description
1	Ring gear No. 1
2	Sun gear No. 1
3	Planetary carrier No. 1
4	Sun gear No. 2
5	Planetary carrier No. 2
6	Ring gear No. 2
7	Planetary carrier No. 3
8	Sun gear No. 3
9	Ring gear No. 3
10	Shell and sun gear No. 4
11	Ring gear No. 4
12	Output shaft and planetary carrier No. 4 assembly
13	Cylinder (clutch and planetary container)

The 10-speed transmission has 4 planetary gearsets. Each gearset consists of a ring gear, a sun gear and a carrier. The gear sets are numbered 1 through 4, from the front to the back of the transmission. There are several direct connections between the gearsets:

Sun gears No. 1 and 2 are directly connected together with gear splines.
Planetary carrier No. 1 and ring gear No. 4 are directly connected together with the cylinder (clutch and planetary container).
Ring gear No. 2 and sun gear No. 3 are directly connected together with a shaft.
Ring gear No. 3 and shell and sun gear No. 4 are directly connected together through the shell of the shell and sun gear No. 4.

Description and Operation - Pump Assembly

Overview Item Description 1 Transmission fluid pump drive gear 2 Transmission fluid pump idler gear 3 Transmission ..

Description and Operation - Transmission Fluid Auxiliary Pump

Item Description 1 Transmission fluid auxiliary pump 2 Transmission fluid auxiliary pump tube 3 Transmission fluid auxil..

Other information:

Ford Explorer 2020-2025 Service Manual: Description and Operation - External Controls - System Operation and Component Description

System Diagram Item Description 1 GSM 2 GWM 3 RCM 4 IPC 5 PCM 6 BCM 7 Driver Door Latch #1 8 Driver Door Latch #2 9 Brake On/Off (BOO) Switch Network Message Chart Broadcast Message Originating Module Message Purpose Brake switch position BCM Input from brake switch necessary to change gears...

Ford Explorer 2020-2025 Service Manual: General Procedures - Piston Inspection

Inspection NOTE: Do not use a caustic cleaning solution or a wire brush to clean the pistons or damage can occur. Clean and inspect the (1) ring lands, (2) pin bosses, (3) skirts and the (4) tops of the pistons. If wear marks, scores or glazing is found on the piston skirt, check for a bent or twisted connecting rod...