Ford Explorer: Electronic Feature Group / Collision Warning and Collision Avoidance System

Removal and Installation - Cruise Control Module (CCM)

Removal All vehicles NOTE: Removal steps in this procedure may contain installation details. NOTE: If installing a new CCM, it is necessary to upload the module configuration informati..

Description and Operation - Collision Warning and Collision Avoidance System - Overview

Overview The forward collision warning system alerts the driver of a collision risk by illuminating the red warning indicator located in the IPC information center...

Other information:

Ford Explorer 2020-2026 Service Manual: General Procedures - Ride Height Measurement

Special Tool(s) / General Equipment Surface Gauge Check NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel. Before measuring ride height check: Tires are inflated to the correct pressure...

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Oil Cooler

Special Tool(s) / General Equipment Hose Clamp Remover/Installer Locking Pliers Removal NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material (including any material created while cleaning gasket surfaces) that enters the oil passages, coolant passages or the oil pan can cause engine failure...