Ford Explorer: Fuel System - General Information / Acceleration Control
Removal
NOTE:
Removal steps in this procedure may contain installation steps.
Disconnect the battery.
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, G..
The acceleration controls consist of the accelerator pedal, APP sensor and bracket assembly.
The throttle is controlled by an APP sensor on the accelerator pedal assembly...
Other information:
Removal
NOTE:
This step is only necessary if the HCM is being replaced.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation...
Special Tool(s) /
General Equipment
Hose Clamp Remover/Installer
Locking Pliers
Removal
NOTE:
During engine repair procedures, cleanliness is extremely
important. Any foreign material (including any material created while
cleaning gasket surfaces) that enters the oil passages, coolant passages
or the oil pan can cause engine failure...
Categories
4 Inch Display
![](images/books/1/index_083.jpg)
A - Tachometer.
B - Information display.
C - Speedometer.
D - Fuel gauge.
E - Engine coolant temperature gauge.
read more