Kia Picanto: Lighting / Headlight escort function: (if equipped). Headlight welcome function: (if equipped)

Kia Picanto 2024-2026 Owner's Manual / Driver Adjustments / Lighting / Headlight escort function: (if equipped). Headlight welcome function: (if equipped)

Headlight escort function: (if equipped)

The headlights and/or tail lights remain illuminated for approximately five minutes after the engine is switched off and the ignition key is removed. If the driver’s door is opened and then closed during this period, the headlights switch off after 15 seconds, providing a brief period of lighting as you leave the vehicle.

To switch the headlights off sooner, press the transmitter or smart key lock button twice. You can also turn the lighting switch away from the headlight or AUTO position to switch the lights off manually.

CAUTION

If you leave through a door other than the driver’s door, the battery saver does not operate and the headlight escort function does not switch off automatically. The lights can remain on and discharge the battery. If you intend to exit through another door, switch off the lamps manually before leaving.

Headlight welcome function: (if equipped)

With the lighting switch in the ON or AUTO position and all doors and the tailgate closed and locked, pressing the unlock button on the transmitter or smart key switches on the headlights for approximately 15 seconds. This provides temporary lighting as you approach your Kia Picanto.

When the switch is set to AUTO, the welcome function operates only at night.

While the welcome lights are illuminated, pressing the unlock button again or pressing the lock button on the transmitter or smart key switches the headlights off immediately.

NOTE

Traffic change (for Europe)

Low-beam headlights normally use an asymmetric light distribution. When a vehicle travels in a country where traffic drives on the opposite side of the road, this beam pattern can dazzle oncoming drivers. ECE requirements address this through technical measures such as automatic beam adaptation, adhesive beam masks or downward adjustment. The headlights described here are designed to avoid dazzling oncoming drivers when used in countries with the opposite traffic direction, so no headlight conversion is required for that purpose.

    Battery saver function. Daytime running light : (if equipped)

    Battery saver function The battery saver helps prevent the battery from discharging if the lighting switch is left in the ON position. After the engine is switched off, opening the driver’s doo..

    Lighting control. High beam operation

    Lighting control ..

    Other information:

    Ford Explorer 2020-2026 Service Manual: General Procedures - Air Conditioning (A/C) Clutch and Air Conditioning (A/C) Clutch Field Coil - Vehicles With: R134A Refrigerant/R1234YF Refrigerant


    Special Tool(s) / General Equipment 412-001 (T71P-19703-B) Remover, Compressor Pulley Activation Remove the A/C compressor. Refer to Air Conditioning A/C Compressor procedure in Group 412. NOTE: If equipped with spring rubber clutch...

    Ford Explorer 2020-2026 Service Manual: Description and Operation - External Controls - Component Location


    ..

    Categories

    Integrated Keyhead Transmitter (If Equipped)

    Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts your vehicle, as well as a remote control.

    read more

     
    Copyright © 2026 www.foexplorer.com