Kia Picanto: Specifications / Bulb wattage

Kia Picanto 2024-2026 Owner's Manual / Specifications / Bulb wattage

Use the table below to identify the specified wattage and bulb type for each lighting position. Some lamps are available in either a conventional bulb or LED version; select the entry that corresponds to the lighting equipment installed in your vehicle.

Lamp position and version Wattage (W) Bulb type
Front Headlamp, low/high beam — Type A 60 HB3
Headlamp, low/high beam — Type B LED LED
Front turn signal lamp Conventional bulb 21 PY21W
LED version LED LED
Position lamp Conventional bulb 5 P21/5W
LED version LED LED
Daytime running light* Conventional bulb 21 P21/5W
LED version LED LED
Side repeater lamp Conventional bulb 5 WY5W
LED version LED LED
Rear Rear turn signal lamp 21 P21W
Tail lamp LED version LED LED
Combined stop and tail lamp Conventional bulb 21/5 P21/5W
Stop lamp LED LED
Reversing lamp 16 W16W
Rear fog lamp* LED LED
Number plate lamp 5 W5W
High mounted stop lamp 5 W5W
Interior Map lamp* 10 W10W
Room lamp 8 FESTOON
Vanity mirror lamps* LED LED
Luggage compartment lamp 5 FESTOON

* If equipped. Entries marked with an asterisk apply only when the corresponding lamp is fitted to the vehicle.

    Dimensions. Engine

    Dimensions The Kia Picanto dimensions below correspond to the reference letters in the illustration. Overall dimensions and front track measurements vary with the market, suspension specifica..

    Tyres and wheels

    For Europe The following specifications cover the listed tyre and wheel combinations for European vehicles. Match the tyre size to the appropriate row, then read the front and rear inflation pre..

    Other information:

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - Halfshaft


    Special Tool(s) / General Equipment 204-161 (T97P-1175-A) Installer, HalfshaftTKIT-1997-LM2TKIT-1997-F/FM2TKIT-1997-FLM2 205-D070 (D93P-1175-B) Remover, Front Wheel Hub Removal NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems...

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - Rear Thermostatic Expansion Valve


    Removal NOTICE: During the removal or installation of components, cap, tape or otherwise appropriately protect all openings and tubes/fittings to prevent the ingress of dirt or other contamination. Remove caps, tape and other protective materials prior to installation...

    Categories

    Fastening the Seatbelts

    The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts.

    read more

     
    Copyright © 2026 www.foexplorer.com