Ford Explorer: Locking and Unlocking / Smart Unlocks for Integrated Keyhead Remote Control (If Equipped)
This helps to prevent you from locking yourself out of your vehicle if the key
is still in the ignition.
When you open one of the front doors and lock your vehicle with the power door
lock control, all the doors lock then unlock and the horn sounds twice if the key
is still in the ignition.
You can still lock your vehicle with the key in the ignition by either:
- Using the keyless entry keypad with the driver door closed.
- Pressing the lock button on the remote control even if you have not closed
the doors.
If both front doors close, you can lock your vehicle by any method, regardless
of whether the key is in the ignition or not.
You can unlock and lock the vehicle without taking the keys out of your pocket
or purse when your intelligent access key is within 3 ft (1 m) of your vehicle...
This helps to prevent you from locking your key inside the passenger compartment
or rear cargo area.
When you electronically lock your vehicle with any door open, the transmission
in park (P) and..
Other information:
Removal
WARNING:
The following procedure describes critical repair steps
required for correct seat component installation. Follow all notes and
steps carefully. Do not place any objects between the seat components
and the body of the vehicle, nor any objects within a joint internal to
the seat structure...
System Operation
System Diagram
Item
Description
1
PCM
2
GWM
3
IPC
4
Generator
5
Generator current sensor
6
HS-CAN1
7
HS-CAN1
8
HS-CAN3
9
BCM
10
Battery monitoring sensor
Network Message Chart
Module Network Input Messages — Body Control Module (BCM)
..
Categories
WARNING: Position the seatbelt height adjuster so that the seatbelt rests
across the middle of your shoulder. Failure to adjust the seatbelt correctly could
reduce its effectiveness and increase the risk of injury in a crash.

read more