Ford Explorer: Bumpers / Removal and Installation - Front Bumper
Removal
-
Remove the front bumper cover.
Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
-
With the help of assistant.
Remove the bolts and the front bumper.
Torque:
35 lb.ft (48 Nm)
Installation
-
To install, reverse the removal procedure.
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details...
Other information:
You can use the remote control to recall memory positions.
If programmed to a pre-set position, the remote control recalls memory positions
when you unlock your vehicle. If you have the easy entry and exit feature enabled
and the ignition is off, the seat moves to the easy entry position...
Removal
NOTE:
LH (left-hand) side shown, RH (right-hand) side similar.
NOTE:
Removal steps in this procedure may contain installation details.
Vehicles with passive entry
Remove the rear door window regulator and motor.
Refer to: Rear Door Window Regulator and Motor (501-11 Glass, Frames and Mechanisms, Removal and Installation)...
Categories
Push the lever up or down to operate
the windshield wipers.

A - Single wipe.
read more