Ford Explorer: Information and Entertainment System - General Information - Vehicles Without: SYNC 3 / General Procedures - Speaker Audio Test

Ford Explorer 2020-2026 Service Manual / Electrical / Information and Entertainment Systems / Information and Entertainment System - General Information - Vehicles Without: SYNC 3 / General Procedures - Speaker Audio Test

Activation

NOTE: The procedure used to download the audio files varies, depending on the web browser used.

Using a suitable web browser, download all of the diagnostic sound tracks to a suitable USB drive.
- 125Hz Sample
- 100Hz Sample
- 80Hz Sample
- 63Hz Sample
- 50Hz Sample
- 40Hz Sample

General Procedures - Bezel Diagnostics

Check NOTE: If there is a concern with one of the following components and Bezel Diagnostics cannot be accessed, obtain the module part number by referencing the label attached to the module...

Removal and Installation - AM/FM1 Antenna Amplifier

Special Tool(s) / General Equipment Interior Trim Remover Removal NOTE: Removal steps in this procedure may contain installation details...

Other information:

Ford Explorer 2020-2026 Service Manual: Description and Operation - Noise, Vibration and Harshness (NVH)

Acceptable Noise, Vibration and Harshness (NVH) Noise is any undesirable sound, usually unpleasant in nature. Vibration is any motion, shaking or trembling, that can be felt or seen when an object moves back and forth or up and down. Harshness is a ride quality issue where the vehicle's response to the road transmits sharply to the customer...

Ford Explorer 2020-2026 Owners Manual: Starting a Gasoline Engine

When you start the engine, the idle speed increases. This helps to warm up the engine. If the engine idle speed does not slow down automatically, have your vehicle checked by an authorized dealer. Note: You can crank the engine for a total of 60 seconds without the engine starting before the starting system temporarily disables...