Ford Explorer: Hydraulic Brake Actuation / Diagnosis and Testing - Hydraulic Brake Actuation
REFER to: Brake System (206-00 Brake System - General Information, Diagnosis and Testing).
Removal
NOTICE:
Siphon the brake fluid from the HCU/EBB reservoir, if the
reservoir is not emptied there will be a large amount of brake fluid
spilled in the engine compartment...
Other information:
Special Tool(s) /
General Equipment
Hose Clamp(s)
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Disconnect the electrical connector.
Remove the locking clip and remove the cabin heater coolant temperature sensor...
Activation
Vertical Alignment
NOTE:
In order to align the CCM,
the front bumper cover must be removed to access the sensor and the
vehicle must be in a wheel alignment bay station so that the vehicle is
level.
NOTE:
Damage to the CCM bracket may affect correct alignment...
Categories
The front outboard and rear safety restraints in the vehicle are combination
lap and shoulder belts.
![](images/books/1/index_075.jpg)
read more