Ford Explorer: Battery and Charging System / Charging System - General Information
Overview
The generator is driven by the FEAD belt. When the engine is started, the generator begins to generate AC voltage which is internally converted to DC voltage...
Other information:
System Operation
System Diagram
Item
Description
1
PCM
2
GWM
3
IPC
4
Generator
5
Generator current sensor
6
HS-CAN1
7
HS-CAN1
8
HS-CAN3
9
BCM
10
Battery monitoring sensor
Network Message Chart
Module Network Input Messages — Body Control Module (BCM)
..
Removal
Remove the IPC.
Refer to: Instrument Panel Cluster (IPC) (413-01 Instrumentation, Message Center and Warning Chimes, Removal and Installation).
Disconnect the electrical connector and remove the driver side register air discharge temperature sensor...
Categories
Use the key blade to start your vehicle and unlock or lock the driver door from
outside your vehicle. The integrated keyhead transmitter functions as a programmed
ignition key that operates all the locks and starts your vehicle, as well as a remote
control.

read more