Ford Explorer: Body and Paint / Body System - General Information
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH side shown, RH side similar.
Remove the upper belt moulding screw at front of the door.
Torque:
12 lb.in (1.3 Nm)
Lift the moulding at the front edge using a non-marring
trim tool and slide forward to disengage from the tab at the rear and
remove th..
Use the touchscreen to select the following:
Select Settings. See Settings.
Select Driver Assist.
Select Cruise Control.
Changing the Set Speed with Intelligent Adaptive Cruise Control
When intelligent mode is on, the system adjusts the set speed to the speed limit
detected by the speed sign recognition system...
Categories
You can use the power door lock control or the remote control to lock and unlock
your vehicle.
Power Door Locks
The power door lock control is on the driver and front passenger door panels.

read more