Ford Explorer: Body System - General Information / Specifications
Materials
| Name |
Specification |
Seam Sealer TA-2-B, 3M™ 08308, LORD Fusor® 805DTM |
-
|
Motorcraft® High Performance Engine RTV Silicone TA-357 |
WSE-M4G323-A6
|
Motorcraft® Silicone Spray Lubricant XL-6 |
ESR-M13P4-A
|
Permatex® Trim and Weatherstrip Adhesive 81850 |
-
|
Insulation
WARNING:
To prevent the risk of high-voltage shock, always follow
precisely all warnings and service instructions, including instructions
to depower the system...
Other information:
The recommended tire inflation pressures are found on the Tire Label which is
located on the B-pillar or the edge of the driver door. This information can also
be found on the Safety Compliance Certification Label, affixed to either the door
hinge pillar, door-latch post, or the door edge that meets the door-latch post,
next to the driver’s seating position...
Activation
Phase 1 - Leak Verification
Run the EVAP Test with the scan tool.
NOTE:
Some small leaks may not be detected using the EVAP Test. If the system has passed the test but a leak is still suspected, then proceed to Phase 2...
Categories
Push the lever up or down to operate
the windshield wipers.

A - Single wipe.
read more