Ford Explorer: Seats / Manual Seats

Ford Explorer 2020-2026 Owners Manual / Seats / Manual Seats

Moving the Seat Backward and Forward

WARNING: Do not adjust the driver seat or seat backrest when your vehicle is moving. This may result in sudden seat movement, causing the loss of control of your vehicle.

WARNING: Make sure the seat fully locks into place by rocking it backward and forward. Not securing the seat into the locked position can be dangerous in a crash and could cause serious personal injury or death.

Adjusting the Seat Backrest

WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips.

WARNING: Do not place cargo or any objects behind the seat backrest before returning it to the original position. Pull on the seat backrest to make sure that it has fully latched after returning the seat backrest to its original position. An unlatched seat may become dangerous if you stop suddenly or have a crash.

Head Restraints

WARNING: Fully adjust the head restraint before you sit in or operate your vehicle. This will help minimize the risk of neck injury in the event of a crash...

Power Seats

WARNING: Do not adjust the driver seat or seat backrest when your vehicle is moving. This may result in sudden seat movement, causing the loss of control of your vehicle...

Other information:

Ford Explorer 2020-2026 Service Manual: Description and Operation - Front Drive Axle and Differential - Vehicles Built From: 10-August-2020

The 6.5-inch ring gear rear differential axle has 3.31, 3.58 and 3.73 gear ratio versions. Front Drive Axle and Differential The front drive axle consists of: A cast-aluminum center section, a removable cast-aluminum differential housing cover Integral-type housing hypoid gear design (center of the pinion set below the centerline of the ring gear)...

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Crankcase Vent Oil Separator

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the intake manifold. Refer to: Intake Manifold (303-01A) . Disconnect the quick release coupling and remove the hose. Refer to: Quick Release Coupling (310-00A Fuel System - General Information - 2...