Ford Explorer: Capacities and Specifications / Engine Specifications - 3.3L, Gasoline

Drivebelt Routing

A - Long drivebelt is on second pulley groove farthest from engine.
B - Short drivebelt is on first pulley groove closest to engine.
Other information:
Activation
Update the AWD (all-wheel drive) module to the
latest calibration available. Module reprogramming will erase stored
transfer case clutch kiss point values and initiate rapid kiss point
learn procedure. If no later calibration is available then proceed with
process below:
1...
Removal
NOTICE:
Siphon the brake fluid from the HCU/EBB reservoir, if the
reservoir is not emptied there will be a large amount of brake fluid
spilled in the engine compartment.
NOTE:
Removal steps in this procedure may contain installation details...
Categories
The front outboard and rear safety restraints in the vehicle are combination
lap and shoulder belts.

read more