Kia Picanto: Rear seat adjustment / Headrest: (if equipped)

Kia Picanto 2024-2026 Owner's Manual / Seating and safety restraints / Seats / Rear seat adjustment / Headrest: (if equipped)

Kia Picanto rear seat headrests for passenger head and neck support

Where fitted, the rear seats in your Kia Picanto have headrests designed to support passenger safety and comfort. Adjust each headrest to suit the person occupying that seating position.

In addition to providing comfortable support, a correctly positioned headrest helps protect the passenger’s head and neck during a collision. Its adjustment is therefore an essential part of preparing the seat for use.

WARNING

Correct Kia Picanto rear headrest alignment with the centre of the occupant’s head
  • For the most effective protection in an accident, adjust the headrest so its middle is level with the centre of gravity of the occupant’s head. For most people, this is approximately the height of the top of the eyes. Keep the headrest as close to the head as possible, and avoid using a cushion that holds the body away from the seatback, as this increases the distance between the head and its support.

  • Do not drive the vehicle with the headrests removed. An occupant may suffer severe injury in a collision without this support. When correctly adjusted, headrests can help protect against serious neck injuries.

Adjusting the height up and down: (if equipped)

Kia Picanto rear headrest height adjustment showing upward movement (1), release button (2) and downward movement (3)

To raise the headrest, pull it upwards until it reaches the desired position (1). To lower it, press and hold the release button (2) on the support while guiding the headrest down to the required height (3). Choose a height that provides the correct alignment for the passenger.

Removal and installation: (if equipped)

Kia Picanto rear headrest removal showing release button (1) and upward removal direction (2)

To remove the headrest, first raise it to its highest position. Press the release button (1) and keep it depressed while pulling the headrest upwards (2) and out of its supports.

To reinstall it, align the headrest posts with the support holes and insert them while pressing the release button (1). Lower the headrest into place, then adjust its height to suit the occupant before using the rear seat in your Kia Picanto.

WARNING

After adjusting or reinstalling the headrest, make sure it locks securely into position. Correct height and secure engagement are both necessary for the headrest to provide its intended protection.

    Rear seat adjustment

    ..

    Folding the rear seat: (if equipped)

    The rear seatbacks in your Kia Picanto can be folded forwards to accommodate longer items or increase the available luggage space. Prepare the seats and seat belts before folding the backrests to..

    Other information:

    Ford Explorer 2020-2026 Service Manual: General Procedures - Transmission Fluid Exchange


    Special Tool(s) / General Equipment Fluid Exchanger Materials Name Specification Motorcraft® MERCON® ULV Automatic Transmission FluidXT-12-QULV WSS-M2C949-A, MERCON® ULV  Connect NOTICE: Use transmission fluid specific for this transmission...

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - Differential Housing Cover


    Materials Name Specification Motorcraft® Ultra Silicone SealantTA-29 WSS-M4G323-A8  Removal With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation)...

    Categories

    Integrated Keyhead Transmitter (If Equipped)

    Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts your vehicle, as well as a remote control.

    read more

     
    Copyright © 2026 www.foexplorer.com