Ford Explorer: Front Drive Axle/Differential / Specifications
Materials
|
Name
|
Specification
|
|
Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant / XY-75W140-QL
|
WSL-M2C192-A
|
|
Motorcraft® High Temperature 4x4 Front Axle and Wheel Bearing Grease XG-11
|
WSS-M1C267-A1
|
Capacities
|
Item
|
Liters
|
|
Material: Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant
/ XY-75W140-QL
(WSL-M2C192-A)
|
0.63
qt (
.6
L)
|
|
Material: Motorcraft® High Temperature 4x4 Front Axle and Wheel Bearing Grease
/ XG-11
(WSS-M1C267-A1)
|
-
|
The 6.5-inch ring gear rear differential axle has 3.31, 3.58 and 3.73 gear ratio versions.
Front Drive Axle and Differential
The front drive axle consists of:
A cast-aluminum center section,..
Other information:
The recommended tire inflation pressures are found on the Tire Label which is
located on the B-pillar or the edge of the driver door. This information can also
be found on the Safety Compliance Certification Label, affixed to either the door
hinge pillar, door-latch post, or the door edge that meets the door-latch post,
next to the driver’s seating position...
Removal
NOTICE:
Under no circumstances should the accessory drive belt,
tensioner or pulleys be lubricated as potential damage to the belt
material and tensioner damping mechanism will occur. Do not apply any
fluids or belt dressing to the accessory drive belt or pulleys...
Categories
Use the key blade to start your vehicle and unlock or lock the driver door from
outside your vehicle. The integrated keyhead transmitter functions as a programmed
ignition key that operates all the locks and starts your vehicle, as well as a remote
control.

read more