Ford Explorer: Traffic Sign Recognition (If Equipped) / Principle of Operation

Ford Explorer 2020-2022 Owners Manual / Driving Aids / Traffic Sign Recognition (If Equipped) / Principle of Operation

WARNING: The system is designed to aid the driver. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention.

WARNING: At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. Failure to take care may result in the loss of control of your vehicle, serious personal injury or death.

WARNING: The system may not function if the sensor is blocked.

Note: In cold and severe weather conditions the system may not function. Rain, snow, spray and large contrasts in lighting can all prevent the sensor from functioning correctly.

Note: Do not carry out windshield repairs in the immediate area surrounding the sensor.

Note: If your vehicle has a suspension kit not approved by us, the system may not correctly function.

Note: Always fit Ford original parts when replacing headlamp bulbs. Other bulbs may reduce system performance.

Note: The system may not detect all traffic signs and may incorrectly read signs.

Note: Keep the windshield free from obstructions for example bird droppings, insects and snow or ice.

Note: The system is designed to detect traffic signs meeting the Vienna convention.

Note: Traffic sign data provided by the navigation system contains information integrated to the data carrier release.

The sensor is behind the interior rear view mirror. It continuously monitors road signs to inform you of the current maximum speed limit and overtaking regulations.

The system detects recognizable traffic signs, for example:

  • Speed limit signs.
  • No overtaking signs.
  • Speed limit cancellation signs.
  • No overtaking cancellation signs.

    Traffic Sign Recognition (If Equipped)


    Using Traffic Sign Recognition

    Setting the System Speed Warning The system has a number of speed warning levels that you can set using the information display. See General Information...

    Other information:

    Ford Explorer 2020-2022 Owners Manual: Warning Lamps and Indicators

    The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information...

    Ford Explorer 2020-2022 Service Manual: Removal and Installation - Siren Speaker

    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation). Remove the siren speaker. Disconnect the siren speaker electrical connector...


    Seatbelt Height Adjustment

    WARNING: Position the seatbelt height adjuster so that the seatbelt rests across the middle of your shoulder. Failure to adjust the seatbelt correctly could reduce its effectiveness and increase the risk of injury in a crash.

    read more

    Copyright © 2022