Ford Explorer: Pedestrian Protection
Pedestrian Alert System
WARNING: The system is not designed to detect cyclists, motorcyclists,
pedestrians or animals. Always drive with due care and attention. Failure to take
care may result in a crash.
Due to the quiet operation of hybrid and electric vehicles at low speeds, the
system creates a subtle sound to alert pedestrians.
The system is on when your vehicle is running and not in park (P). Some sound
may be audible in the passenger compartment.
WARNING: Modifying or adding equipment to the front end of your vehicle
(including hood, bumper system, frame, front end body structure, tow hooks and hood
pins) may affect the performance of the ..
Other information:
System Operation
Principles of Operation
The 4WD system is active all the time and requires no input from the driver. The 4WD
system continuously monitors vehicle conditions and automatically
applies torque to the front wheels when conditions or a drive mode
selection commands it...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the rear bumper cover.
Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation).
Remove the following items:
Disconnect the electrical connectors and position aside the wirings...
Categories
Note: You may not be able to shift out of park (P) unless the intelligent
access key is inside your vehicle.

read more