Ford Explorer: Driveline / Front Drive Halfshafts

Ford Explorer 2020-2026 Service Manual / Chassis / Driveline / Front Drive Halfshafts

Removal and Installation - Front Halfshaft Speed Sensor

Materials Name Specification Motorcraft® SAE 75W-140 Synthetic Rear Axle LubricantXY-75W140-QL WSL-M2C192-A  Removal With the vehicle in NEUTRAL, position it on a hoi..

Diagnosis and Testing - Front Drive Halfshafts

Principles of Operation Inspection and Verification Verify the customer concern. Visually inspect for obvious signs of mechanical or electrical damage...

Other information:

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Turbine Shaft Speed (TSS) Sensor


Removal Remove the main control valve body. Refer to: Main Control Valve Body (307-01B Automatic Transmission - 10-Speed Automatic Transmission – 10R80, Removal and Installation). Remove the TSS sensor. Slide the plastic lock to the unlocked position...

Ford Explorer 2020-2026 Service Manual: Removal and Installation - Antenna Isolator Module


Special Tool(s) / General Equipment Interior Trim Remover Removal NOTE: Removal steps in this procedure may contain installation details. Release the clips and remove the liftgate center upper trim panel. Use the General Equipment: Interior Trim Remover Release the clips and remove the liftgate RH upper trim panel...

Categories

Integrated Keyhead Transmitter (If Equipped)

Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts your vehicle, as well as a remote control.

read more

 
Copyright © 2026 www.foexplorer.com